 |
GPS-9580 GPS BT ext. device
External GPS with Bluetooth Device, USB Cable, optional Car Cigarette
The GPS9580 , based on state of the art Mediatek Bluetooth and GPS chipset, of great sensitivity and supreme accuracy, is a Bluetooth receiver plus data logger function. The GPS receiver delivers an outstanding signal to noise (S/N) reception figure. The on-chip image-rejection mixer, plus SAW filter is alleviated, makes this 32-channel GPS Receiver acquires and tracks satellites in the shortest time even at low signal levels, providing fast TTFF (time-to-first-fix) which is to the strictest industrial stand ard. The GPS9580 can perfectly pair up with your Smart phone, PDA or Laptop PC, to assist the navigation during your journey.
Features
‧Bluetooth, V1.2 compliance, class 2
‧32 channel GPS L1(C/A code) receiver
‧Cold/Warm/Hot Start Time: 38/36/1 sec. at open sky and stationary environments
‧ Reacquisition Time: 0.1 second
‧-158 high sensitivity
‧Operation hours: 10 hours in continuous mode
‧GGA/GSA/GSV/RMC (Default Output). VTG/GLL (Optional)
‧RoHS compliance
‧Very attractive, petite, sleek and light design
‧For data logger function-- waypoints: 30,000 points (Optional)
Interface
‧TTL level serial Port/Bluetooth for GPS communications interface
‧Protocol: NMEA-0183
‧Baud Rate: 38400 bps
Power
Main power input: DC 3.3~5.0V
(Acquisition mode)
Power consumption: 185 mW
Supply Current: 56 mA@3.3VDC
(Tracking mode)
Power consumption: 106 mW
Supply Current: 32 mA@3.3VDC (Tracking mode) |
 |
GPS-910e
SPECIFICATIONS
Tracks up to 12 satellites.
Receiver: L1, C/A code
Snap Start: <3 sec (at < 25 minutes off period)
Update rate: 1 HZ.
Acquisition time
Reacquisition 0.1sec.averaged
Hot start 8 sec., averaged
Warm start 38 sec., averaged
Cold start 45 sec., averaged
Position accuracy:
Non DGPS (Differential GPS)
Position 5-25 m CEP without SA
Velocity 0.05 m/sec, typical
Time 1 usec sync GPS Time
DGPS (Differential GPS)
Position 1 to 5 m, typical
Velocity 0.1 m/sec, without SA
EGNOS/WAAS/Beacon
< 2.2 m, horizontal 95% of time
< 5 m, vertical 95% of time
Antenna Type: Built in Patch Antenna
Dynamic Conditions:
Altitude 18,000 meters (60,000 feet )max
Velocity 515 meters / second (700 knots) max
Acceleration 4 G, max
Jerk 20 meters/second, max
Minimum signal tracked: -175dBW
Dimension: 66 × 46 X 27.5 mm
Weight: <100g
LED function:
Power On/Off and Navigation
Update Indication
Operation Temperature:
-40  to +80 
Store Temperature:
-45  to +100 
Operation Humidity:
5% to 95% No condensing.
Power consumption
<170mA at 4.5- 5.5V input
Protocol and interface:
NMEA output protocol: V.2.2
Baud rate: 4800 bps
Data bit: 8
Parity: N
Stop bit: 1
Output format:
Standard: GGA, GSA,GSV, RMC.
Optional: GLL, VTG, SiRF binary
Interface:
RS232 + CMOS TTL Level, or
RS-232 + DGPS |
 |
GPS-911
1 CFA compliant.
2 Within SiRF StarII/LP low power All-in-View high performance 12-parallel channels
GPS consumption: continuous mode 80mA(include Antenna).
3 Support Standard NMEA 0183 command: GGA, GSA, GSV, RMC, GLL, VTG.
4 SingleSat updates in reduced visibility
5 Superior urban canyou performance
6 FoliageLock for weak signal tracking
7 Optional external antenna
8 Built-in active Antenna for high sensitivity to satellite signal.
9 uilt-in super capacitor to reserve system data for rapid satellite acquistion
10 LED indicator for GPS fix or not fix.
Specification:
Compact Flash type I
NMEA0183 protocol, and supports command: GGA, GSA, GSV, RMC, GLL, VTG
WGS84
8 sec.average
38 sec.average
48 sec.average
18,000m(60,000 feet)Max.
100ms
515 meters/sec(1000knots)Max
20 m/sec**3
15m 2d RMS without SA 10m 2d RMS WAAS enable 1-5m DGPS correceed
40m 95%
0.1m/sec 95%
1us synchronized to GPS time
95 mm*47mm*17mm
90 mA(include Antenna)
DC 3.3V +- 10%
-40°C ~ 85°C
-30°C ~ 80°C
Up to 95% non - Condensing |
|
 |
GPS-912
1.1 Overview
BLUETOOTH GPS series wireless bluetooth GPS Receiver from Road Navigation, Inc. is a standalone, high quality GPS receiver, which combines GPS and bluetooth communication technology together. GPS position data could be sent wireless through bluetooth protocol without messy cords or cable. This bluetooth GPS receiver could be put in any place for best satellite signal reception without considering cord issue. BLUETOOTH GPS could meets most general consumer position tracking applications and, furthermore, could meet professional strictly applications such as car navigation and tracking, digital mapping, outdoor surveying, security, agriculture, etc.
Through standard wireless bluetooth communication protocol (serial port profile), It could directly link and communicates with most popular bluetooth enabled electronic devices like PDA/notebook/PC or embedded system, and then become a low cost and high quality GPS system with best portability.
With built in high capacity li-ion battery, patch antenna and compacted size, lightweight, BLUETOOTH GPS is easily portable and can operate independently long Period of time without any external power source
Note:
When using receiver, it is better to put GPS in the environment of clear view of sky in order to receive directly correct and better satellite signal.
1.2 Features
The BLUETOOTH GPS/610/620 provides great features as below.
Tracks up to 12 satellites with first fast fix and low power consumption.
SiRF Star II low power chipset
Differential capability utilizes real-time RTCM corrections producing 1-5 meter position accuracy.
Compact size and light weight for best portability
RF connector (mmcx) for external antenna
Bulit in high capacity rechargeable battery and patch antenna keep device operate about 8.5~9 hours
Support bluetooth serial port profile 1.1, class 2 protocol (SSP)
Support NMEA 0183 format with 38400bps baud rate (default)
FLASH memory inside for program upgradeable
Three LED display GPS, bluetooth and battery status
1.3 Technology specifications
1.3.1 Physical Dimension
Size: 86 (W) x 55 (D) x 23 (H) (mm)
Weight: 90g (with battery)
RF connector: mmcx (external antenna is optional)
1.3.2 Environmental Characteristics
Operating temperature: -20oC to +60oC
battery charging temperature: 0oC to +40oC
Humidity range: 5%~95% no condensing
1.3.3 Power Characteristics
Input voltage: 5VDC
Battery: Rechargeable Lithium-ion cell battery(1000mA) with 5VDC battery
charging circuit
operate time: 8.5~9 hours at battery full charge condition
CAUTION:
Due to this GPS built-in lithium-ion battery, so Do not expose GPS and battery to
temperature above 60oC. Do not disassemble or mistreal this GPS and battery
2. Failure to follow these instructions may present risk of explosion, fire, or high temperature
Datum
Default: WGS-84
Other: selectable for other datum (refer to appendix A)
1.3.5 GPS Performance
Tracks up to 12 satellites.
Update rate: 1 second.
Acquisition time
Reacquisition 0.1 sec., averaged
Hot start 8 sec., averaged
Warm start 38 sec., averaged
Cold start 45 sec., averaged
4. Position accuracy:
A) Non DGPS (Differential GPS)
Position 5-25 meter CEP without SA
Velocity 0.1 meters/second, without SA
Time 1 microsecond synchronized GPS time
B) DGPS (Differential GPS)
Position 1 to 5 meter, typical
Velocity 0.05 meters/second, typical
C) EGNOS/WAAS/Beacon
Position < 2.2 meters, horizontal 95% of time
< 5 meters, vertical 95% of time
5. Dynamic Conditions:
Altitude 18,000 meters (60,000 feet) max
Velocity 515 meters / second (1000 knots) max
Acceleration 4 G, max
Jerk 20 meters/second, max
1.3.6 Wireless specifications
compatible with bluetooth 1.1 serial port profile(SSP)
transmitter power: class 2
transmission range: up to 10 meters
frequency range: 2402mhz ~ 2480mhz
hopping channel: 79
modulation: GFSK
receiver sensitivity: -85dbm
1.3.7 Interfaces
Connection: bluetooth 1.1 serial port profile(SSP)
Protocol: NMEA 0183 format (default), and Sirf Binary format
(GPGGA, GPGSA, GPGSV, GPRMC )
baud rate: 38400, N,8,1 (default)
|
|
